Request list

is empty

You are here

Model 410 Peristaltic Pump

If you cannot find the part number in the documentation please provide detail. Specific to this item, it could include part number or application detail, (ex. 20 meters of cable, or 20 litres of volume)

Solinst Peristaltic Pumps are designed for vacuum pumping or pressure delivery of liquids or gases. They are ideal for sample removal from shallow wells and surface water.

Solinst Peristaltic Pump Model 410 for sampling up to 8m below ground level

The mechanical peristaltic operation is effective to depths of approximately 10m at sea level, limited only by the suction lift limit which varies with elevation.The Solinst Peristaltic Pump has variable pumping rates and can be fitted with 2 different sizes of silicon pump head tubing. With the 3/8" OD (10mm) tubing the pump delivers a sample rate as low as 40 mL/min and up to 900 mL/min. If the 5/8" OD (16mm) tubing is used, it delivers from 120 mL/min to almost 3.5L/min.

The pump operates using any 12 volt DC power source (battery) which can supply at least 3-5 amps at maximum draw. The variable speed motor is reversible and reverse polarity protected. A 4m long power cord allows easy connection to almost any 12 volt DC battery.

Ordering Information:
Model 410 Solinst Peristaltic Pump (c/w 3ft. 5/8" OD Silicon Tubing)

Spare Parts
105137 5/8" OD Silicon Tubing per metre
105234 5/8" OD Dura Clamp (each)
105055 3/8" OD Tubing Adaptor
105136 3/8" OD Silicon Tubing per metre
105235 3/8" OD Dura Clamp (each)
109030 Replacement Head